USED EQUIPMENT MARKETPLACE AS OF APRIL 26, 2010
Some file photos are representative of items and may differ from actual equipment. |
| ITEM
|
DESCRIPTION
|
PRICE
|
COMMENTS
|
PHOTO
|
| AIR COMPRESSOR |
Sears 5 HP w/80 gal upright tank |
$695.00 |
Will call only |
Enlargement unavailable
|
| ALIGNMENT SYSTEM |
Hunter parallelogram alignment rack, 8000 lbs cap, with truck runway extensions and two (2) rolling jacks.
John Bean 4-wheel alignment instrumentation, pre-wired to Hunter rack. |
$5,495.00 for the complete system |
Price includes delivery and installation in Wasatch Front. |
|
| BRAKE LATHE |
Accuturn Model 7700 combination lathe w/bench |
$2,595.00 |
Delivered in Wasatch Front |
Enlargement unavailable
|
| BRAKE LATHES |
AMMCO Model #7700 rotor lathe on stand and Model #3000 drum lathe on stand, plus many adapters. |
$3,495.00 for the pair, includes tax |
Delivered in Wasatch Front |
Enlargement unavailable
|
| DRILL PRESS |
Guardian drill press |
$75.00 |
Will call only |
|
| FRAME PULLER
|
Kuhn powered post w/truck height extension. Newly rebuilt air/hydraulic pump has 90-day warranty.
|
$895.00, tax included
SOLD
|
New anchor tie downs and installation available, additional cost
|
Enlargement unavailable
|
| JACK, ROLLING AIR
|
W-K rolling air jack for four-post lift or alignment rack, 6000 lbs cap
|
$995.00
|
| Enlargement unavailable
|
| LIFT, ABOVE-FLOOR
|
ALM Model 9902A, asymmetric, clear-floor, 2-post lift, 9000 lbs cap., 220 v 1 phase
|
$1,795.00
|
Installation extra, ask for quote. Nice condition, already taken down.
|
|
| LIFT, ABOVE-FLOOR
|
HH70, asymmetric, floor plate style lift, 7000 lbs cap, 230 v 1 phase
|
$1,895.00
|
Includes installation (Salt Lake Area) except electrical wiring.
|
|
| LIFT, LOW RISE
|
Tire changing lift, 6000 lbs cap, 110 v, with new seals
|
$895
|
Will call only |
Click to enlarge
|
| MACPHERSON STRUT SPRING COMPRESSOR |
Branick Model 7400 wall mounted spring compressor |
$795.00, includes tax.
S O L D |
Brand new; still in the box. |
Click to enlarge
|
| NITROGEN GENERATOR
|
Flo Dynamics Model Tyger 3 tire filling generator
|
$1,125
|
Just two years old |
Click to enlarge
|
| OIL DRAIN, ROLL AROUND
|
Roll around commercial duty oil drain, 15 gal capacity
|
$195.00, tax included
|
One only
|
Enlargement unavailable
|
| PAINT BOOTH
|
Accudraft Model 600 DS insulated downdraft booth, 27' L with raised basement and heated air make-up unit. |
$27,250 delivered. Booth new in 2004, in storage past four years in Arizona. |
Installation extra, ask for quotation. Same as drawing, but 27' long. |
Click to enlarge
|
| PAINT BOOTH
|
DeVilbiss crossdraft galvanized truck booth, 36'L X 16'W X 16'H. Booth already taken down, in storage. |
$12,500 Booth may be lengthened for additional charge. |
Installation extra, ask for quotation. |
Click to enlarge
|
| PAINT BOOTH
|
Global Fastpak galvanized open-face industrial booth, 6' D X 8' W X 7' H. Includes fan, motor, 1 light fixture, plus some ducting. Less than 2 years old. |
$2,395 |
Already taken down. Installation extra, ask for quotation. |
|
| PAINT BOOTH
|
Golden State Semi Downdraft booth, 27' L x 14' W x 9' H |
$9,850 plus $700 freight |
Brand new booth! Installation extra, ask for quotation. |
Click to enlarge
|
| PAINT BOOTH
|
Spraybake Model ADDvantage III downdraft, insulated car booth with dry filtration, 24'L X 14'W X 10'H. Includes heater, recirculates heat during bake cycle. |
$14,950 Booth already taken down, in storage for past few years. |
Installation extra, ask for quotation. Can be converted for use with waterborne paints by adding Junair Qads, extra charge. |
Click to enlarge
|
| PAINT BOOTH
|
Spray Systems semi downdraft galvanized booth, 27' L X 14' W X 9' H, with Bananza heated air make-up system and free standing mix room. (Was water sprinkled.) |
$22,500
Booth is taken down. |
Installation extra, ask for quotation. |
Enlargement unavailable, not representative photo.
|
| PAINT BOOTH
|
Spray Tech crossdraft, galvanized steel booth 24' L X 14' W X 9' H (ID), 230 V/3 phase. Includes fan, motor, light fixtures, dry chem fire suppression. Disassembled, stored in our warehouse. |
$8,995 includes tax
S O L D |
Installation available, additional charge |
Click on link to view drawing.
Spray Tech Crossdraft
|
| PAINT BOOTH
|
Spray Tech reverse semi-downdraft, powdercoated white, 24' L X 14' W X 9' H (ID). Includes fire system, Mercury heated air make-up, ducting, upgraded six-tube lights, bake cycle, variable frequency drive. |
$26,500 with just 300 hrs of operation! |
Installation, gas and 240 V 3 phase electrical wiring available, additional charge. |
Click to enlarge
|
| PAINT BOOTH FANS
|
Qty 2 used 42" fans with motors. Great for DIY truck booth builder. |
$995 each |
Installation extra, ask for quote. |
Enlargement unavailable
|
| PAINT BOOTH HEATER
|
Bananza Model B1 surface-mount horizontal air make-up system with top discharge, deluxe digital control panel, 34" 5 HP exhaust fan, complete ducting. |
$13,995 for all items listed. Seven-year-old unit was installed, never fired off. |
Installation extra, ask for quote. Add to a downdraft booth shell for complete set-up. |
Photo unavailable
|
| PAINT BOOTH HEATER
|
Bananza Model B2 exterior-mount vertical air make-up system. Standard size for truck booth, 2.2 MBTU, with recirculating heat. |
$9,500 |
Installation extra, ask for quote. |
Enlargement unavailable
|
| PAINT BOOTH HEATER
|
Rupp heated air make-up unit for truck booth. 2 MBTU, horizontal, down discharging. |
$8,500 |
Installation extra, ask for quote. |
Enlargement unavailable
|
| PAINT BOOTH HEATER
|
Weather-Rite horizontal natural gas heated air make-up unit for car booth. |
$6,500 |
Installation extra, ask for quote. Representative unit pictured. |
Enlargement unavailable
|
| PAINT STORAGE CABINET, FLAME-PROOF
|
Just-rite Model #894520 flammable paint storage cabinet, 45 gal capacity, 65"H X 43"W X 18"D. Self closing, 2-door, recessed handle padlock, yellow color, 2 shelves.
|
$595.00 per cabinet, tax included
|
Qty 2 available. Items are new, with slight freight damage.
|
Enlargement unavailable
|
| PREP STATION
|
Owner-built, wall-mounted sanding station with substantial fan. 240 V 3 phase.
|
$2,995
|
Installation extra, ask for quote
|
Photo unavailable |
| PREP STATION
|
Sorbent Control reconditioned mobile prep station, charcoal filtered, 110 V.
|
$4,250
|
Installation extra, ask for quote
|
Click to enlarge
|
| PREP STATION
|
Sorbent Control downdraft or semi downdraft single Euro prep station, powdercoated white, traditional dry filtration. Includes canopy, 10 lights, new curtains.
|
$9,500.00
|
Installation extra, ask for quote and how this unit can qualify as CTOF.
|
Double unit pictured--selling single unit.
|
| REFRIGERANT RECYCLER |
SPX/Robinair Cool Tech Model #34700Z R134a recovery, recycling and recharging unit |
$1,395.00, includes tax
S O L D |
Delivered in Wasatch Front |
Enlargement unavailable
|
| THINNER/SOLVENT RECYCLER
|
PBR Thinner recycler, five gallon capacity.
|
$1,295.00
|
|
Photo unavailable
|
